www.laptopsockets.co.uk part of the www.sparesweb.com group Tel: 0121-622-1217 9.30am-5.30pm mon-friday, limited tel service outside office hours
|
www.laptopsockets.co.uk part of the www.sparesweb.com group Tel: 0121-622-1217 9.30am-5.30pm mon-friday, limited tel service outside office hours |
|
Unhappy replacing the socket yourself, we do a budget normally same day turnaround at this link
fixed price no fix no fee laptop repair at this link only £129+vat click here to go to the repair page and you can book it in online
Top value lcd replacement service at this link
Need help in dismantling your system?
Laptop Schematics and disassembly guides are available at this link New low pricing with volume discounts on lcd rubber end caps at this link for those that are interested bulbs standard specs below The bulb's power
depends on the bulb length, the longer the bulb, the higher the power, it is 1w
per 100mm,so
|
Selecting Cold Cathode Fluorescent Lamp (CCFL)--LCD Backlight See also Backlight fitting guide See backlight ordering and pricing page The CCFL (Cold Cathode Fluorescent Lamp) is a light source classified as an electronic component. The CCFL in simplest ter is a gas-discharge light source, which produces its output from a stimulated phosphor coating inside the glass lamp envelope. A CCFL can be described as a transducer converting electrical energy into light energy.
Backlight Reflector: The Silver Reflector is sputter-coated Ag on polyester film with outstanding optical, mechanical and thermal properties Lamp Reflector The CCFL or backlight Lamp is mount in side a reflector., an example of a notebook one is shown below, but on some other units there may be up to 4 lamps inside a multiple reflector
Reflector that normally holds the tube inside it, be careful when removing the old tube How to select the LCD Backlight: Backlights or ccfl tubes come in various lengths, and the length varies on various brands of lcd. As an example, the 15" lcd may use between 260-330mm the best way to select a backlight is to measure the one that you presently have There are three main ways to select the right lamp, which are below. You need to get as close as you can but not going longer than the one you have (they don't squash down) generally you can get away with between 2-10mm shorter than the original lamp without affecting the quality of the light you receive. even with one slightly shorter, you would only have a tiny slightly less bright corner just below the lamp, but it would still be perfectly usable. Remember if you select one to long, you will not be able to install it. How to Measure the Length of LCD Backlight Method 1: Direct Measure: This is the best way to get the closed length of lamp possible.
Method 2 IN-Direct Measure: LCD Backlight (CCFL Lamps) are normally held on inside of Reflector as picture shown at below.
Active area Measurement for Laptop Screen: It is not a good idea to pull your old lamp out from your laptop screen, measuring it and waiting for new lamp to arrive. So there is another effective way by measuring the active area of screen, horizontally as shown on photo below. Then you can do that all the replacement at once. Measure the active area width (View Area) (measurement active) from left to right (Horizontally), add between 2-5mm to the length
Example: Active area is 272mm; you should use
275mm (or the one slightly below if exact size is not available)
|
Join our mailing list using the form below, to receive details of our new products, and special members discounts New address and contact numbers from 11th feb 2008 Tel: 0121 622 1217 Fax: 0121 622 6999 Sparesweb.com ltd
MINIMUM spend at the new trade counter
is £10+vat
|
|
New address and contact numbers
from 11th feb 2008 |
Showing the ccfl backlight with the rubber insulator , or cap removed with the
pin showing
